11000W Super Power Gas Stove 3 Ceramic Burners Auto Electric Ignition Gas Tank Conversion Adapter

  • $21.64
    Unit price per 



Name:Three Infrared ceramic burners windproof stove


Fuel  : Butane/ Propane /Butane-propane mixture

Fuel Type: 1. Directly connect with Canister fuel  2. With fuel connection adapter, use with bulk tank fuel

(Adapter is optional, if you need this, when placing order, please choose stove with adapter)

Ignition:  Electronic ignition

Heat Output: 11000W or 37534 BTU / hr

Gas Consumption: 270g/hour

Average Boil Time of 1L water:  1.2min

Material: Stainless steel, cooper, ceramics

Application: Group/family Camping, Party outdoor cooking

Dimensions: Unfold: 34*12cm/13.4*4.7in

                       Fold: 16*12cm/6.3*4.7in

Net Weight: 730g/25.7oz

Max Support Weight: More than 100kg/220lb

Flame Adjustable: YES

Max Pot Diameter: 34cm/13.4in

Supported Canister: Lindal Valve Canister (You may need gas nozzle converters for different propane tanks)


Feature Highlight


  1. Three Infrared ceramics burners design with 11000W (37534 BTU / hr) heating output provide a strong and uniform fire support,  has a super fast boil time of 1L water taking 1.2minutes.
  2. Large pot rack support max. 34cm/13.4in diameter cooking utensils, Sturdy and heavy duty , Bearing 100KG+/220LB weight : suitable for large group camping
  3. Folding rack to easily fit in your pack: Folded size 16*12cm/6.3*4.7in ,Lightweight at only 370g/13oz for easy carrying
  4. Infrared ceramics burners durable, save 30%-40% energy , along with 3 wind shields provides 2-level windproof function


Safety Guideline

Keep the device always away from children

Ensure that the appliance and pump seals are in place and in good condition before fitting the gas cartridge.

Do not use any gas canister/fuel bottle that leaks

During breaks and at the end of each usage switch off the flame immediately

Use the device only in properly ventilated places and in sufficient distance form combustible sources

Keep the device always away from the face, body or clothes, if it is switched on and in operation.

Do not make any modifications or open up the device


Quick Troubleshooting Guide

Problem: After losing the flame adjuster, the stove cannot be lighted up.


1, Tighten the flame adjuster to close the gas, turn the gas canister clockwise to ensure that the gas valve needle connects well with the gas canister, and try it again.

2, Change another gas canister, and try it again.

3, If you sense the gas coming out, but the stove is not lighted up, please check the leak first, to ensure that the gas does not come out from inappropriate positions such as the gas connection joint, or somewhere in the both end of the tube, if so, please contact us to change parts.

4, If you sense the gas coming out appropriately, but the stove is not lighted up, something must be wrong with the stove, please contact us at your first convenience for the further support.


Problem: One or two of the 3 ceramic burners does not light up.


The reason that some of burners do not light up is because the gas nozzles of the problematic burners are blocked by impurities. Please use needle or iron wire to clean the gas nozzles, the gas nozzle is small brass device located in the air vent under each burner. The way to clean the gas nozzles is that you use the needle or iron wire to insert into the small middle hole and push down, repeat the actions for several times to clear blockage. Please be noted, the diameter of the middle hole is 0.26mm, therefore, the maximum diameter of the needle or iron wire should be smaller than 0.26mm.

The other way to clean the gas nozzles is that you use high pressure air gun (or compressed-gas cleaning duster) to blow toward the middle hole, repeat it several time to clear blockage.

















 1 * Stove

1 * Storage Bag(Gas cylinder connection pipe, sell separately, or with set)



    Customer Reviews

    Based on 1 review Write a review